Tuesday, October 19, 2010

Still working

and I Can't wait to show you what I am doing but in the meantime, I thought I would show you my spring fling contest entry from 2009, I t was meant to be on the grounds of the Garfield, bu the way the Garfield is growing, it will have to be next to it. Any way here is the front

This house was so I could experiment with various techniques I wanted to try.I really like the two tone bead board. You might not be able to see it but there is a copper roof on the curved roof.

This is the inside, this now has a potting bench but aside from that its pretty much the same. The floors are scrap book paper.

This is the top floor, i still need a telescope, but the idea was the garner lies to watch the stars.  I need to get some other photos, one day.

Till Net time, Lidilstuff

And Cathrine

Monday, October 11, 2010

Library with your turkey?

 Well I didn't update"Last week " Beacuse I wanted to get a touch bit more done and beside, I should save it for a holiday! 
Cat said it was ok, aslong as I upadted today, Anyway if your canadian, Happy Thanksgiving! If youre not Happy Monday! 
Anyways  I have played with the layout yet again with the garf I have made the library two stories, scraped the kids castle room  so far, and the music room. We Now have a two storey library. Of to the right will be a large conservatory which will house The music collection. Cathrine seems to think this is much more fitting of a grand manor.

As you can see In the first photo there is molding right between the two floors The will be but not that one The will be a cast iron stair case between the two floors and to make the lower book shelves accessible The stair case has to be out a touch. Anyway the upper loft has four sets of shelves as well as what could be a bench or a table, I will probably use this for a bench and have a couple of chairs up there. The Ceiling Will Have Lights around the mural and possibly a few more embellishments. There will also be a large ish chandler. Oh The gentleman there is Christopher he is the man of the house. Gina Gagnon Made him she did a fabulous job! Cat seems to have an eye on him, forget it lady hes taken, By Maria, she will be created soon. I will probably do a cast iron railing up here. Also the open space at the back won't be there when I am done.

The down stairs book case will have pin hinges making it more or less of a barristers book case. The exception being that this will hold Taxidermy! Well Plastic animals made to look like taxidermy. The drawers at the bottom open. I am planing on using one for rocks, shells, eggs, butterfly's etc. The far wall or the the tall wall will hold a massive fire place, I am in the process of hunting one down, It will be hopefully six inches tall, And the over mantle i am hoping about seven or eight. I am thinking a heavily carved mahogany or stone fire place with rocks going up the rest of the wall. BTW the ceiling in this room is seventeen inches tall! This room will be mahogany paneled with white trim, and a parqet floor. The conservatory floor will Be raised.

The next shot is a close up of the book case. I don't know if you have looked at old glass lately, but most of it has ripples. I simulated this with nail polish. The top to shelves will probably hold books. I will replace those nobs with brass pulls and the doors will get pulls as well. Just one more thing Cathrine seems to think that the barristers bookcase area and the mural need lights so i will probably do that.

Till next time Lidilstuff
and Cathrine

Saturday, October 2, 2010

A Picture

Hi all This week, I thought I would show you a snap shot of my HBS project for last year. Its an Egyptian styled gazebo. See? I CAN Do something different!

Over View



I wanted something simple and not to cluttered as a change of pace. I love this little scene!

Tll Next time
Lidil Stuff

Ps. Cat says Hi.

Tuesday, September 21, 2010

Hello I thought I would post a tutorial today. Today we will learn how to wire a Lamp. This can be applied to ceiling lights wall sconces any thing with a single light. Its really easy, bear with me Cat is supra vising. She says she doesn't want me messing this up.

Ok so will need the light in question, a replaceable light string. My favorite to use is one wher you can replace the bulb. Any way you will also need small needle nose pliers and a knife, It doesn't have to be shiny though Cathrine disagrees.

So fist thing we do is remove the bulb if you can, we don't want it damaged, remove the shade or what ever is on it. Next cut the cord from the plug we won't need the wire if you are going to reattach it so discasard or here's an idea be creative with it  any way. . .

Next we pull the wire and in some case the bulb through. If the bulb isn't removable wear gloves and use hemostats or pliers. Pull thru.

Next, we will grab the new wire and bulb we will pull it strait just run your fingers along it.

Now thread the wire thru. In some cases you will have to bend it thru turns and curly q's just a bit at a time.

One you threaded it thru, you can attach it to you tape wire or splice it, we will just reattach the plug today.

So Split the wires gently with the knife and separate them with your hands or pliers, hands should work fine.

Now using your finger nail, it doesn't have to be sharp its better if its not take off a little more than 1/4 an inch leaving a bit of wire.


Now straiten it out and feed your plug thru it.


Make an M shape with the wires.

Slide it in, this can be tricky.

Put your prongs in long side out is how this on came but I have seen them reversed. Use your pliers for this.

And we are DONE!!!!!! You should be able to plug it in now in your standard transform/lighting system.

Cathrine is telling me that I "Took too long." This took me two photo shoots, the first one dint turn out. On a side nOte My studio is cleaning up well. Two more days and I can play!!

She says I gotta get back to it. *Mumbles something about slave driver*

Till Next time 
And Cathrine

Sunday, September 19, 2010

Say Hello to Catherine

She likes to be called Cat.
 I have nothing against cats mind you, but this ones bossy. I picked her up at the Edmonton Show. I got her home and she won't stop talking. She weezled out of me that a I have a blog, yes I know its a tad neglected, well more than a tad. . .

Any way Cat had one look and said 'There is no way this will do. No way at all we have to re do every thing.'

When told her to go for it, she took one look at me and said I am not wrecking these heels on that key board. If i must ruin them it will be walking over you. 

Sheesh. We are off to pick new blog designs. She wants weekly updates,and more tutorials. And lets not go into what kinda uh building she wants.

I should mention Cat wants the work room cleaned and every thing must go, well she says. I am trying to clean it. really. Well . . .  We had a leak  and I had to mop n bleach up the water and mold nothing Major was ruined. Well i will Close this up and hope to  here from You soon!

Till Next time 


and Catherine

Friday, April 23, 2010

It has come

It has come indeed. my card reader!!

After three months, *grumble*

Any ways I will show you a tutorial of sorts today, Here is a shot of the crown molding in the Garfield living room. The diagram on the left is how i did it. A piece of strip wood up top, followed by one bellow, and another bellow that. Then there is two different crown moldings. sorry about the lousy pictures, i need to play with my cameras settings. Poke the pictures to make them bigger! Well I hope this gives you ideas, i have other things to share. But right now i  am working on green leafs 4th annual  spring fling! Linkie here.

Oh I should also mention I am Meca Featured artisan for April!
Meca is a small forum and growing.

Till next time

Lidil Stuff!

Tuesday, April 20, 2010

Still here

Honest! I am and have been waiting very impatiently waiting for a card reader, mean time here is a pic to keep you occupied, its an old one. I made it from a photo box used to keep well photos in! 

The rest was scraps, and woodsies that were already painted.

I need a card reader!!!

Till next time, Lidilstuff

Monday, February 1, 2010

If I had a gazilon dollars

I would buy me a big house to house my Garfield in. No I haven't expanded, but i thought i would show you my idea of a dream Garfield, i would need at least a 25 x25 foot room with a tall ceiling, i would need two Garfield's and a low table, thought i would share.

The pictures go in order 1st floor second floor third fourth and then basement ad sub level 0
Till next time,